Your Position : Home > Bluetooth Headphones & Earphones > Sport Earphone
Wireless Bluetooth Earphones B006
Product Feature:
Bluetooth version:     4.1
Radio-frequency region: 7m outdoor, 15m indoor
Standby time: ≈3500hrs
Talking time:  ≈8hrs
Playing time:  ≈7hrs
Charging time: ≈1.5hrs
Weight:        14.8g
Dimensions (length x width x height): 34x19.5x30mm
Microphone Unit: Ф4*1.5mm.
Directivity: All point
S.P.L: -42dB ± 3dB
Impedance: 2.2KΩ
Frequency Response: 100Hz-10KHz
Operating voltage: 2.2V
Image Gallery
Product Description
Specifications
Download
Image Gallery
Product Description


Product schematic
Features:
  • 1.    Power on – press and hold the MFB button for about 3 seconds, the blue LED will be on for 2s and then blink at 500ms interval.
  • 2.    Power off – press and hold the MFB button for about 3 seconds, the red LED will blink for 2s.
  • 3.    To accept a call – press the MFB button once
  • 4.    To end a call - press the MFB button once
  • 5.    To reject a call – press and hold the MFB button for about 2 seconds
  • 6.    Dialing the latest number – press and hold the MFB button and redial the latest numbers
  • 7.    Call diverting – when accepting a call, press and hold the MFB button for 2 seconds to switch the voice between the earphones and the cell phone.
  • 8.    Placing a call on hold – press the MFB button once to place the current call on hold and answer the third call.
  • 9.    Cancel the call on hold – press and hold the MFB button to switch the two calls
  • 10.    Playback control – press the MFB button to play/pause a song
  • 11.    Adjusting the volume – press the V+ button to raise the volume, it will prompt a tone of “beep” when reaching the largest volume; press the V- to decrease the volume.
  • 12.    FF and REW – press and hold the V+ key to skip forward to the next track; press and hold the V- key to skip backward to the latest track.
  • Attention: The functions may differ on different brands of cell phones. Please read your cell phone’s user manual carefully.
  • 13.     Voice prompts
  • (1)     When you turn the headset on, there will be voice prompt:” Power on”
  • (2)    When you turn the headset off, there will be voice prompt:”Power off”
  • (3)     When you enter Pairing mode, there will be voice prompt:” Ready to Pair”
  • (4)     When the pairing is finished, there will be voice prompt:”Pairing connect”
  • (5)     When you disconnect the headset to a phone, there will be voice prompt:”Device disconnect”
  • (6)     When the battery is running out of power, the headset beeps.
  • 14.     Pairing the headset with a phone
  • (1)     Place the Bluetooth earphones and the cell phone no more than one meter from each other if you pair the devices for the first time.
  • (2)     Make sure the headset is off. Then press and hold the MFB button for about 5 seconds to enter “discover” mode. The blue and red indicator lights will blink alternately
  • (3)     Activate the Bluetooth feature on your phone and “search for the headset” or “add new device” and choose “AUSDOM SP006”; enter the Bluetooth PIN “0000” to pair and connect the headset to your phone.
  • (4)     If it failed pairing, please repeat the procedures above.
  • (5)     If the pairing is successful, the LED indicator light is solid blue.
  • 15.     Electricity Quantity Alarm – when the battery level is lower than 10%, Li-battery cell voltage lower than 3.3v, battery voltage lower than 3v, the Bluetooth will automatically turn off and it beeps; the red indicator light will blink for 2 seconds and flash 3 times; the alarm time will be 1 minute at intervals.
  • 16.     Charging instructions
  • (1)     The headset has a rechargeable internal battery. Make sure the Bluetooth headset is fully charged before using it for the first time.
  • (2)     Put the plug into the charging port of the earphones
  • (3)     The indicator light is solid red when charging
  • (4)     It takes about 1.5 hours for fully charging
  • (5)     When the battery is fully charged the red indicator light will go off.

Pairing to Mobile Phone or other device
    Pairing means unique and encrypted wireless connection between two Bluetooth devices when they agree to communicate with each other. In order to pair two Bluetooth devices, they should be placed close enough to each other.
  • 1.    Activate the Bluetooth feature on your phone and search for the Bluetooth headset (see your phone’s user manual).
  • 2.    Turn on the device and enter the pairing mode.
  • 3.    Search the headset from the list of devices found by your phone.
  • 4.    If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your phone.
  • 5.    Your phone will confirm the pairing, and then press YES/OK.
  • 6.    Choose the connecting device on your cell phone. You can play the music, watch TV series/movies and play games; via the device you can hear any voice or music. You can also control the player like adjusting the volume or skip the track.

Pairing to a computer and Entertainment
  • 1.    If your computer doesn’t support the Bluetooth function, then a Bluetooth adapter is necessary. Install an adapter on your computer and make sure the Bluetooth function is already activated.
  • 2.    Turn on the device and enter pairing mode
  • 3.    Turn on the Bluetooth software installed on your computer and choose the function to search the Bluetooth device. Please read the details about the Bluetooth software on the user manual.
  • 4.    A few seconds later, the names of the Bluetooth devices will be listed. Choose the mark of the device and click the right-hand button of the mouse to pair and connect to the audio device.
  • 5.    Turn on your media player to play the tracks, watch TV series/movies and play games; you can hear all the sound and music from your device.

Handing of the Waste Electrical
  • 1.    This product or product attached with following marks cannot be handled with other domestic waste when the use time finishes.
  • 2.    Please separate this product from other type of the waste in order to prevent damage to the environment or human health due to abuse or mishandling of the waste; recycle the product responsibly to promote the usage of the material resources sustainably.
  • 3.    Please contact with the retailer of the product or the local related organization to know about the regulation on the administration of the recovery and disposal of waste electrical and electronic products.
  • 4.    Enterprises should contact with the suppliers and check the terms and conditions of the purchase contract. This product should not be disposed with other commercial waste.

FAQ
  • 1.    Q: Why can’t I turn on the earphones?
  • A: Make sure that the device is fully charged. This product cannot be turned on under the condition of low power.
  • 2.    Q: Why there is no sound when listening to the music?
  • A: Please check the connection between your mobile phone and computer with the device. If the connection is off, please reconnect it and adjust the volume.
  • 3.    Q: Why the cell phone or computer cannot find the device?
  • A: Please check your Bluetooth on your cell phone or computer is “available”. If the connection is timed out, the paring mode will log out, and then please reenter the paring mode. If there are some problems in your apps, please restart your smart phone. If there is something wrong with your device, please reboot it.


Product schematic
Features:
  • 1.    Power on – press and hold the MFB button for about 3 seconds, the blue LED will be on for 2s and then blink at 500ms interval.
  • 2.    Power off – press and hold the MFB button for about 3 seconds, the red LED will blink for 2s.
  • 3.    To accept a call – press the MFB button once
  • 4.    To end a call - press the MFB button once
  • 5.    To reject a call – press and hold the MFB button for about 2 seconds
  • 6.    Dialing the latest number – press and hold the MFB button and redial the latest numbers
  • 7.    Call diverting – when accepting a call, press and hold the MFB button for 2 seconds to switch the voice between the earphones and the cell phone.
  • 8.    Placing a call on hold – press the MFB button once to place the current call on hold and answer the third call.
  • 9.    Cancel the call on hold – press and hold the MFB button to switch the two calls
  • 10.    Playback control – press the MFB button to play/pause a song
  • 11.    Adjusting the volume – press the V+ button to raise the volume, it will prompt a tone of “beep” when reaching the largest volume; press the V- to decrease the volume.
  • 12.    FF and REW – press and hold the V+ key to skip forward to the next track; press and hold the V- key to skip backward to the latest track.
  • Attention: The functions may differ on different brands of cell phones. Please read your cell phone’s user manual carefully.
  • 13.     Voice prompts
  • (1)     When you turn the headset on, there will be voice prompt:” Power on”
  • (2)    When you turn the headset off, there will be voice prompt:”Power off”
  • (3)     When you enter Pairing mode, there will be voice prompt:” Ready to Pair”
  • (4)     When the pairing is finished, there will be voice prompt:”Pairing connect”
  • (5)     When you disconnect the headset to a phone, there will be voice prompt:”Device disconnect”
  • (6)     When the battery is running out of power, the headset beeps.
  • 14.     Pairing the headset with a phone
  • (1)     Place the Bluetooth earphones and the cell phone no more than one meter from each other if you pair the devices for the first time.
  • (2)     Make sure the headset is off. Then press and hold the MFB button for about 5 seconds to enter “discover” mode. The blue and red indicator lights will blink alternately
  • (3)     Activate the Bluetooth feature on your phone and “search for the headset” or “add new device” and choose “AUSDOM SP006”; enter the Bluetooth PIN “0000” to pair and connect the headset to your phone.
  • (4)     If it failed pairing, please repeat the procedures above.
  • (5)     If the pairing is successful, the LED indicator light is solid blue.
  • 15.     Electricity Quantity Alarm – when the battery level is lower than 10%, Li-battery cell voltage lower than 3.3v, battery voltage lower than 3v, the Bluetooth will automatically turn off and it beeps; the red indicator light will blink for 2 seconds and flash 3 times; the alarm time will be 1 minute at intervals.
  • 16.     Charging instructions
  • (1)     The headset has a rechargeable internal battery. Make sure the Bluetooth headset is fully charged before using it for the first time.
  • (2)     Put the plug into the charging port of the earphones
  • (3)     The indicator light is solid red when charging
  • (4)     It takes about 1.5 hours for fully charging
  • (5)     When the battery is fully charged the red indicator light will go off.

Pairing to Mobile Phone or other device
    Pairing means unique and encrypted wireless connection between two Bluetooth devices when they agree to communicate with each other. In order to pair two Bluetooth devices, they should be placed close enough to each other.
  • 1.    Activate the Bluetooth feature on your phone and search for the Bluetooth headset (see your phone’s user manual).
  • 2.    Turn on the device and enter the pairing mode.
  • 3.    Search the headset from the list of devices found by your phone.
  • 4.    If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your phone.
  • 5.    Your phone will confirm the pairing, and then press YES/OK.
  • 6.    Choose the connecting device on your cell phone. You can play the music, watch TV series/movies and play games; via the device you can hear any voice or music. You can also control the player like adjusting the volume or skip the track.

Pairing to a computer and Entertainment
  • 1.    If your computer doesn’t support the Bluetooth function, then a Bluetooth adapter is necessary. Install an adapter on your computer and make sure the Bluetooth function is already activated.
  • 2.    Turn on the device and enter pairing mode
  • 3.    Turn on the Bluetooth software installed on your computer and choose the function to search the Bluetooth device. Please read the details about the Bluetooth software on the user manual.
  • 4.    A few seconds later, the names of the Bluetooth devices will be listed. Choose the mark of the device and click the right-hand button of the mouse to pair and connect to the audio device.
  • 5.    Turn on your media player to play the tracks, watch TV series/movies and play games; you can hear all the sound and music from your device.

Handing of the Waste Electrical
  • 1.    This product or product attached with following marks cannot be handled with other domestic waste when the use time finishes.
  • 2.    Please separate this product from other type of the waste in order to prevent damage to the environment or human health due to abuse or mishandling of the waste; recycle the product responsibly to promote the usage of the material resources sustainably.
  • 3.    Please contact with the retailer of the product or the local related organization to know about the regulation on the administration of the recovery and disposal of waste electrical and electronic products.
  • 4.    Enterprises should contact with the suppliers and check the terms and conditions of the purchase contract. This product should not be disposed with other commercial waste.

FAQ
  • 1.    Q: Why can’t I turn on the earphones?
  • A: Make sure that the device is fully charged. This product cannot be turned on under the condition of low power.
  • 2.    Q: Why there is no sound when listening to the music?
  • A: Please check the connection between your mobile phone and computer with the device. If the connection is off, please reconnect it and adjust the volume.
  • 3.    Q: Why the cell phone or computer cannot find the device?
  • A: Please check your Bluetooth on your cell phone or computer is “available”. If the connection is timed out, the paring mode will log out, and then please reenter the paring mode. If there are some problems in your apps, please restart your smart phone. If there is something wrong with your device, please reboot it.
Specifications
Headset Specification
Speaker diameter: ¢10mm
Impedance: 16Ω
S.P.L: 109±3dB/1KHz
Rated power: 3mW
Frequency Response:    20Hz-12000KHz
Mic Specification
Microphone Unit: ¢4*1.5mm
Directivity: Omnidirectional
S.P.L: -42±3dB
Impedance: ≤2.2kΩ
Frequency Response: 100Hz-10KHz
Operating voltage: 2V
Headset Specification
Speaker diameter: ¢10mm
Impedance: 16Ω
S.P.L: 109±3dB/1KHz
Rated power: 3mW
Frequency Response:    20Hz-12000Hz
Mic Specification
Microphone Unit: ¢4*1.5mm
Directivity: Omnidirectional
S.P.L: -42±3dB
Impedance: ≤2.2kΩ
Frequency Response: 100Hz-10KHz
Operating voltage: 2V

Download